Ride Engineering Billet Split Clamp 22mm KTM/HQV/GG 13-21
Ride Eng. split triple clamps have been designed with four goals in mind:
1) Optimize body position: Bar position 3mm back from stock. Ride Eng. also offers optional offset bases for our bar mounts providing 4 bar positions as measured from the stem hole: 6mm forward, 9mm forward, 15mm forward & 18mm forward (using stock bar mounts your positions are either 7mm or 17mm forward.
2) Flex: This new split design is made from 2024 aluminum and provides far better comfort and uncompromised suspension action
3) Improve the handling with a new gull wing design
4) Place the pinch bolts in the front to allow for different aftermarket handguard mounts and added flex.
Each set comes with frame mounted hour meter relocation bracket. 22mm Offset recommended for Arenacross (AX); Motocross (MX); Supercross (SX); Grand National Cross Country (GNCC); World Off-road Championship Series (WORCS) & Desert Racing (DR).
This is our favorite offset for 2015-21 SX/XC/XC-F with the 4CS Forks & AER forks(small front axle) for most applications like motocross.
Note: GasGas riders need to switch from solid mounted bar mounts to rubber mounted and will need these two items: KT-BBM00-CA & KT-BMN16-KT. Usually compatible with aftermarket stabilizers, call the manufacturer to confirm.
Included in kit: Top clamp, Bottom clamp, Pressed in stem and Lower bearing. best use: AX - MX - SX - GNCC - WORCS - DR
GasGas: 2021 MC/EC/EX 125/250/300/350/450; HUSKY : 2014 - 2021 TC 125/250 - FC 250/350/450; 2015-2021 TE/TX 150/250/300 & FE 250/350/450/501; 2017-2021 FX 350/450. 2012.5-2021.5 KTM SX/SX-F/XC-F/XC & 2014 - 2021 EXC-F/XC-W 125/150/250/300/350/450/501