Warp 9 Supermoto Kickstand 690/701 Enduro

Not much to add to what everyone else is saying other than if you get this and want a larger foot plate you need to look for one for a 2018 or older 690 supermoto as those had the round foot originally like this one compared to the tapered foot on the stock later model 690/701 foot. Tusk has nice one for really cheap that works great in loose dirt/sand to keep your bike from falling over. Also your stock magnet for the kickstand sensor fits exactly as it does on your OEM stand. Same as the spring. Both that you reuse from your original side stand. I installed this after a 1.25" Kouba link and love it. Been using for 2 years and I get on my 701 enduro cowboy style with the bike always on the side stand and it has not bent or shifted or anything yet.

I put the lowering link on my 701 Enduro and wanted a shorter side stand. This works perfectly, it's an easy direct swap, is very well made and works great.

Purchased to replace stock kickstand on my enduro. with the big foot, it was a bit tall. With this new one, too short.

Lowered my 2020 690 enduro r with lowering link. This kickstand works perfect. AIMC fast shipping too.

Bought this to install on my 2017 KTM 690 Enduro R after lowering using a Kouba Link (1.625). Works absolutely perfect bike leans over just the right amount. This kickstand is significantly beefier than the stock one the material feels thicker. Suggestions: thread kickstand bolt through kickstand before installing on the bike to get the powdercoat out of the threads also make sure to install the magnet from the old kickstand on the new one!!

I am not that tall and so have had to lower my 690 using the Kuba link once you do this especially when loaded up with gear when you put the bike on the stand you have to be careful where you park as it has started tipping over a couple of times. Also I found it hard to lift the original side stand until I fitted a hose clip for extra traction.nnNow with this installed the bike leans over like a normal bike even with the gear on have added a large foot plate which adds 6mm. Now I can raise and lower it easily.

I recently converted my KTM 690 Enduro to supermoto. The OEM kickstand was way too long after the smaller rims and tires were installed. Install was easy and was a direct replacement. This kickstand eliminates the potential for a fall over.

I bought this kickstand for my 2021 KTM 690 Enduro R. I had my bike lowered 1\ with a koubalink and another 30mm with a lowering kit. Total lowered 2.18\. This kickstand is spot on and makes the bike perfectly stable. I can mount the bike while it is on the kickstand by standing on the foot peg with no danger of the bike falling over in either direction. I saw other reviews which said the kickstand was 3\ shorter not the stated 1.5\. My Warp 9 kickstand is 1.5\ or maybe 1.75\ shorter than the stock kickstand and as I said spot on! Thank you!

Beautifully finished product that is to easy install but much too short for the Enduro without a lowering link installed or SM wheels. Over 3 inches shorter than the stock Enduro sidestand so now the bike is at a greater risk of tipping over to the inside than the original risk of tipping to the outside with the stock stand. I took it off immediately after installing it. I then got my original sidestand chopped by the appropriate 1.5 inches.

This kickstand is 3 inches shorter than one not 1.5 like advertised. I lowered my enduro 30mm and had to take this kickstand off immediately after installing because the lean angle was too hard and foot was cutting in to the floor. Quality is exceptional though.