AG Hill (Idaho) | November 1st, 2022
Pros: good construction
Cons: too short for enduro, hard to install.
Recommended: no for enduro
Purchased to replace stock kickstand on my enduro. with the big foot, it was a bit tall. With this new one, too short.
Michael Imhoff (Oregon) | September 5th, 2022
Lowered my 2020 690 enduro r with lowering link. This kickstand works perfect. AIMC fast shipping too.
Jessica Posa (Ohio) | March 9th, 2018
Pros: Beefy|Well-constructed|Perfect length(lowered bike)
Bought this to install on my 2017 KTM 690 Enduro R after lowering using a Kouba Link (1.625). Works absolutely perfect bike leans over just the right amount. This kickstand is significantly beefier than the stock one the material feels thicker. Suggestions: thread kickstand bolt through kickstand before installing on the bike to get the powdercoat out of the threads also make sure to install the magnet from the old kickstand on the new one!!
Paul Grech (Sydney Australia) | July 13th, 2018
Pros: less stressful parking
I am not that tall and so have had to lower my 690 using the Kuba link once you do this especially when loaded up with gear when you put the bike on the stand you have to be careful where you park as it has started tipping over a couple of times. Also I found it hard to lift the original side stand until I fitted a hose clip for extra traction.nnNow with this installed the bike leans over like a normal bike even with the gear on have added a large foot plate which adds 6mm. Now I can raise and lower it easily.
Brian Williams (United States) | November 1st, 2018
I recently converted my KTM 690 Enduro to supermoto. The OEM kickstand was way too long after the smaller rims and tires were installed. Install was easy and was a direct replacement. This kickstand eliminates the potential for a fall over.