Husqvarna Handlebar End Mirror

Helps increase the sleek profile of my 2023 Vitpilen, whilst retaining functionality. Once they're installed and properly aligned, actually a little clearer than the OEM mirrors. Also really nice weight to them, plus the built in dampening made them a much better option than cheaper alternative which would forgo the dampening to account for the lower cost.

These mirrors are super well built and perfect for my Svartpilen. The mirror size is very large measuring at about 4” wide, which produces great visibility. I didn’t come across many other bar end mirrors with such a large surface. Adjusting their position is just hard enough where it won’t get accidentally bumped out of place. They have a decent amount of tilt so I was able to rotate the arms a good amount forward and tilt the mirrors down as my preferred setup. They are perfect really unless the mirror size is too big for some. I did have to get creative and use a small spacer for the right side so the throttle wouldn’t stick. NOTE: A couple of the small 5 screws used to switch the mirrors between the left and right rattled out on one of my mirrors. That might have been totally my fault from not tightening enough. Definitely tighten these little suckers down or use some Loctite 243 for the little screws. The screws are black M4 x 18 socket head caps which I did order suitable replacements for so not the end of the world.

Easy to install

I have a 2022 Svartpilen and, as much as I love it, the stock mirrors mainly gave me a great view of my shoulders. While I suppose it's useful to see if I have lint or dandruff, it wasn't especially helpful in traffic. Because they are slightly convex these bar end mirrors give me an almost panoramic view behind me. And they took me less than ten minutes to install. I can't recommend them highly enough.