AMP Performance Jet Kit KTM/HQV 250/300 2017

I have a 2017 KTM 300XC and had been battling the jetting setup for over a year. I would get it nice and crisp off bottom but would succumb to the hanging idle or ping on top. I first installed the JD jet kit... It worked OK but I still had the hanging idle and it wasnt super crisp off bottom. Honestly I though I may have an air leak and the problem was not with the jetting... nope. Air/Leak test checked out. I dropped Mike a note at AOMC and he recommended this jetting kit saying how it brings the pre-18 two strokes up to spec with KTMs new carb settings. This was just the ticket! I installed this kit which comes with a different needle than what is provided from factory as well as new needle jet and pilot/idle jet. The bike is running like its supposed to now... unbelievably crisp and no weird idle conditions/hanging idle after a WOT scenario like on a long straight away or uphill. If you have a 2017 two stroke and are struggling with the jetting look no further than the AMP Performance Jet Kit! BUY IT!