superseded by 21012940200

This part has be superseded by part #21012940100.\n\nLooks/Style: Like all other official Husqvarna anodized parts these things are HIGH quality and worth the price. Looks wise I like the stock micky mouse mirrors I bought the bar end mirrors because I wanted to give them a try and so my bike cover would have a loose fit. The only issue I have with the style is the mounting point which is super basic/overly-cylindrical this could\ve been machined differently to match the neo-cafe racer looks imo. FYI the mirrors themselves are SMALLER in diameter than the stock mirrors. \n\nInstallation: You will likely received part #21012940100 which has additional mounting hardware due to the 2020 bikes having a different fitting inside the bar. So you will NOT need to use the expanding joint/fitting as seen in the stock images. Instead the 2020 bikes have a threaded plug (that can come out if desired) the plug is simpler because you just use the bolt and spacer included in the kit. \n\nInstallation note: The plug inside the handlebars is typically flush with the end of the bar but in some cases the plug may have been pressed in too far. If the plug is too far inside the bar you need to find a way to draw the plug out until it\s flush with the end of the bar. I ended up using a bunch of washer that are wider than the bar end and used the stock bar end + bolt to draw out the plug until it was flush.\n\nFunctionality: I personally feel the stock mirrors can be adjusted to work well I\m 6\0\ and yes it\s hard to angle the mirrors in a way that doesn\t get obstructed by your shoulders but it\s possible. The other thing is that the bar end mirrors have convex glass which captures more rearview area but \objects in mirror are closer than they appear\. The bar ends are probably better for highway driving while the stock mirrors are better for city driving.